Browsing by Author "Apollo, Nicholas"

Now showing 1 - 5 of 5
  • Thumbnail Image
    Item
    Development and Characterization of a Sucrose Microneedle Neural Electrode Delivery System
    (Wiley, 2017-12) Apollo, Nicholas; Jiang, Jonathon; Cheung, Warwick; Baquier, Sebastien; Lai, Alan; Mirebedini, Azadeh; Foroughi, Javad; Wallace, Gordon; Shivdasani, Mohit; Prawer, Steven; Chen, Shou; Williams, Richard; Cook, Mark; Nayagam, David; Garrett, David
    Stable brain–machine interfaces present extraordinary therapeutic and scientific promise. However, the electrode–tissue interface is susceptible to instability and damage during long-term implantation. Soft, flexible electrodes demonstrate improved longevity, but pose a new challenge with regard to simple and accurate surgical implantation. A high aspect ratio water-soluble microneedle is developed based on sucrose which permits straightforward surgical implantation of soft, flexible microelectrodes. Here, a description of the microneedle manufacturing process is presented, along with in vitro and in vivo safety and efficacy assessments. Successful fabrication requires control of the glass transition temperature of aqueous sucrose solutions. The insertion force of 5 different microneedle electrode vehicles is studied in agarose brain phantoms, with the sucrose microneedle eliciting the lowest insertion force and strain energy transfer. Short- and long-term assessments of the pathological response to sucrose microneedle implantations in the brain suggest minimal tissue reactions, comparable to those observed following stainless-steel hypodermic needle punctures. Finally, microelectrodes fabricated from graphene, carbon nanotubes, or platinum are embedded in sucrose microneedles and implanted into an epileptic rat model for 22 d. All electrodes are functional throughout the implantation period, with the graphene electrode exhibiting the largest seizure signal-to-noise ratio and only modest changes in impedance.
  • Thumbnail Image
    Item
    Development of a Magnetic Attachment Method for Bionic Eye Applications
    (Wiley Periodicals, Inc., 2016) Fox, Kate; Meffin, Hamish; Burns, Owen; Abbott, Carla; Allen, Penelope; Opie, Nicholas; McGowan, Ceara; Yeoh, Jonathon; Ahnood, Arman; Luu, Chi; Cicione, Rosemary; Saudners, Alexia; McPhedran, Michelle; Cardamone, Lisa; Villalobos, Joel; Garrett, David; Nayagam, David; Apollo, Nicholas; Ganesan, Kumaravelu; Shivdasani, Mohit; Stacey, Alastair; Escudie, Mathilde; Lichter, Samantha; Shepherd, Robert; Prawer, Stephen
    Successful visual prostheses require stable, long-term attachment. Epiretinal prostheses, in particular, require attachment methods to fix the prosthesis onto the retina. The most common method is fixation with a retinal tack; however, tacks cause retinal trauma, and surgical proficiency is important to ensure optimal placement of the prosthesis near the macula. Accordingly, alternate attachment methods are required. In this study, we detail a novel method of magnetic attachment for an epiretinal prosthesis using two prostheses components positioned on opposing sides of the retina. The magnetic attachment technique was piloted in a feline animal model (chronic, nonrecovery implantation). We also detail a new method to reliably control the magnet coupling force using heat. It was found that the force exerted upon the tissue that separates the two components could be minimized as the measured force is proportionately smaller at the working distance. We thus detail, for the first time, a surgical method using customized magnets to position and affix an epiretinal prosthesis on the retina. The position of the epiretinal prosthesis is reliable, and its location on the retina is accurately controlled by the placement of a secondary magnet in the suprachoroidal location. The electrode position above the retina is less than 50 microns at the center of the device, although there were pressure points seen at the two edges due to curvature misalignment. The degree of retinal compression found in this study was unacceptably high; nevertheless, the normal structure of the retina remained intact under the electrodes.
  • Thumbnail Image
    Item
    Direct fabritcation of 3D graphene on nanoporous anodic alumina by plasma-enhanced chemical vapour deposition
    (Scientific Reports, 2016-01-25) Zhan, Hualin; Garrett, David; Apollo, Nicholas; Ganesan, Kumaravelu; Lau, Desmond; Prawer, Steven; Cervenka, Jiri
    High surface area electrode materials are of interest for a wide range of potential applications such as super-capacitors and electrochemical cells. This paper describes a fabrication method of threedimensional (3D) graphene conformally coated on nanoporous insulating substrate with uniform nanopore size. 3D graphene films were formed by controlled graphitization of diamond-like amorphous carbon precursor films, deposited by plasma-enhanced chemical vapour deposition (PECVD). Plasma-assisted graphitization was found to produce better quality graphene than a simple thermal graphitization process. The resulting 3D graphene/amorphous carbon/alumina structure has a very high surface area, good electrical conductivity and exhibits excellent chemically stability, providing a good material platform for electrochemical applications. Consequently very large electrochemical capacitance values, as high as 2.1 mF for a sample of 10 mm3, were achieved. The electrochemical capacitance of the material exhibits a dependence on bias voltage, a phenomenon observed by other groups when studying graphene quantum capacitance. The plasma-assisted graphitization, which dominates the graphitization process, is analyzed and discussed in detail.
  • Thumbnail Image
    Item
    Hermetic diamond capsules for biomedical implants enabled by gold active braze alloys
    (Elsevier, Ltd., 2015-03) Lichter, Samantha; Escudie, Mathilde; Stacey, Alastair; Ganesan, Kumaravelu; Fox, Kate; Ahnood, Arman; Apollo, Nicholas; Kua, Dunstan; Lee, Aaron; McGowan, Ceara; Saunders, Alexia; Burns, Owen; Nayagam, David; Williams, Richard; Garrett, David; Meffin, Hamish; Prawer, Stephen
    As the field of biomedical implants matures the functionality of implants is rapidly increasing. In the field of neural prostheses this is particularly apparent as researchers strive to build devices that interact with highly complex neural systems such as vision, hearing, touch and movement. A retinal implant, for example, is a highly complex device and the surgery, training and rehabilitation requirements involved in deploying such devices are extensive. Ideally, such devices will be implanted only once and will continue to function effectively for the lifetime of the patient. The first and most pivotal factor that determines device longevity is the encapsulation that separates the sensitive electronics of the device from the biological environment. This paper describes the realisation of a free standing device encapsulation made from diamond, the most impervious, long lasting and biochemically inert material known. A process of laser micro-machining and brazing is described detailing the fabrication of hermetic electrical feedthroughs and laser weldable seams using a 96.4% gold active braze alloy, another material renowned for biochemical longevity. Accelerated ageing of the braze alloy, feedthroughs and hermetic capsules yielded no evidence of corrosion and no loss of hermeticity. Samples of the gold braze implanted for 15 weeks, in vivo, caused minimal histopathological reaction and results were comparable to those obtained from medical grade silicone controls. The work described represents a first account of a free standing, fully functional hermetic diamond encapsulation for biomedical implants, enabled by gold active alloy brazing and laser micro-machining.
  • Thumbnail Image
    Item
    Soft, Flexible Freestanding Neural Stimulation and Recording Electrodes Fabricated from Reduced Graphene Oxide
    (John Wiley and Sons, 2015-05-04) Apollo, Nicholas; Maturana, Matias; Tong, Wei; Nayagam, David; Shivdasani, Mohit; Foroughi, Javad; Wallace, Gordon; Prawer, Steven; Ibbotson, Michael; Garrett, David
    There is an urgent need for conductive neural interfacing materials that exhibit mechanically compliant properties, while also retaining high strength and durability under physiological conditions. Currently, implantable electrode systems designed to stimulate and record neural activity are composed of rigid materials such as crystalline silicon and noble metals. While these materials are strong and chemically stable, their intrinsic stiffness and density induce glial scarring and eventual loss of electrode function in vivo. Conductive composites, such as polymers and hydrogels, have excellent electrochemical and mechanical properties, but are electrodeposited onto rigid and dense metallic substrates. In the work described here, strong and conductive microfibers (40–50 μm diameter) wet-spun from liquid crystalline dispersions of graphene oxide are fabricated into freestanding neural stimulation electrodes. The fibers are insulated with parylene-C and laser-treated, forming “brush” electrodes with diameters over 3.5 times that of the fiber shank. The fabrication method is fast, repeatable, and scalable for high-density 3D array structures and does not require additional welding or attachment of larger electrodes to wires. The electrodes are characterized electrochemically and used to stimulate live retina in vitro. Additionally, the electrodes are coated in a water-soluble sugar microneedle for implantation into, and subsequent recording from, visual cortex.